SUNRAY

COILS

&

PROBES

TC Metal Detectors
HELPING YOU FIND TREASURE IS OUR BUSINESS
Established 1977...The oldest and largest detector dealer
in Connecticut and Western Mass . We use what we sell

TC Metal Detectors 53 Hartford Ave., Granby, CT 06035
DIRECTIONS & MAP
Phone: 860-844-1218
Hours of Operation:
4:00 Till 9:00 PM Weekdays
10AM-5 PM Sat / Closed Sunday
Tony@tcmetaldetectors.com

Fisher | Minelab | Tesoro | Garrett | Bounty Hunter | Troy Shadow | Detector Pro
Used Detectors | Sunray | Coiltek | Books & Maps | Display Cases | Coin Cleaning
Scoops | Diggers | Headphones | Coils | Carry Bags | Misc Access. | Home

NOTE: All accessories are plus shipping. Shipping charges will be added after the order is packaged and weighed. Only actual s&h will be billed and we do our best to pack items together where possible for maximum savings.

Search Coils & Probes

SUN RAY INVADER™ FX-1 TARGET PROBE
(Compatible with the Fisher F-75 Metal Detector)

The new Sun Ray Invader FX-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Fisher F-75 owners. Now F-75 owners can enjoy the same benefits our quality Sun Ray in-line probes have offered users of previous Fisher models! Here are some of the features of the FX-1:

  • Fully compatible with the Fisher F-75 model only. The FX-1 is precision built to ensure peak performance.
  • Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, operation modes, ground and moisture conditions!
  • New compact, light weight, waterproof/submersible 6" X 1" diameter probe mounts nicely along arm rest for easy access. FX-1 probe and cable weigh approx. 5 oz. FX-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 10 oz total!
  • While the FX-1 probe is waterproof the switch box is water resistant and must not be submersed.
  • Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.
  • The FX-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions!
  • High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" straight cable with strain relief for "tangle free" operation.
  • Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
  • Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
  • FX-1 switch box is conveniently mounted on detector pole in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
  • No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
  • No extra batteries required as the FX-1 utilizes the detectors power source.
  • Complete installation & operation instructions included.

FULL 12 MONTH WARRANTY!!
No more Empty holes! No more scratched or damaged targets!
Experience a Sun Ray in-line probe on your detector and
you'll wonder how you ever got along without it!!

SUN RAY INVADER™ FX-1 TARGET PROBE
Plus Shipping
Qty: Price: $179.95

View Shopping Cart | Empty Shopping Cart
SUN RAY INVADER™ CS-1 TARGET PROBE

(Compatible with the Fisher Coin$trike & ID Edge Metal Detectors)

The new Sun Ray Invader CS-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Fisher Coin$trike & ID Edge users. We have received many requests for in-line target probes by Fisher brand users for some time due to the popularity of our quality in-line probes for Minelab, White's and Garrett metal detectors. Now Fisher owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the CS-1:

  • Fully compatible with the Fisher CoinStrike & ID Edge models with the flip of a switch! The CS-1 is precision built to ensure peak performance.
  • Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on detector model, settings, ground and moisture conditions!
  • Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely along arm rest for easy access. CS-1 probe and cable weigh approx. 6 oz. FE-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
  • While the CS-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Fisher.)
  • Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.
  • The CS-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions!
  • High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible 30" straight cable with strain relief for "tangle free" operation.
  • Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
  • Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
  • New "Detector Selection Switch" allows you to switch between CoinStrike & ID Edge. Also allows the use of both CoinStrike & ID Edge coils interchangeably between detectors!
  • CS-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
  • No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
  • No extra batteries required as the CS-1 utilizes the detectors power source.
  • Complete installation & operation instructions included.

FULL 12 MONTH WARRANTY!!

SUN RAY INVADER™ CS-1 TARGET PROBE
Plus Shipping
Qty: Price: $179.95

View Shopping Cart | Empty Shopping Cart

Click Images for Larger View

Sunray GI-1 Garret Inline Probe

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for Garrett metal detectors! The new Sun Ray Invader GI-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Garrett GTI users. We have received many requests for in-line target probes by Garrett brand users for some time due to the popularity of our quality in-line probes for Minelab, White's and Fisher metal detectors. Now Garrett owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the GI-1:

  • Fully compatible with all Garrett GTI models (including the 1500, 2000, 2500)! The GI-1 is precision built to ensure peak performance.
  • Accurate "bullseye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!
  • Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft for easy access. GI-1 probe and cable weigh approx. 6 oz. GI-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
  • While the GI-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Garrett.)
  • Installation requires no tools or modifications to the detector.
  • The GI-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions! (The GI-1 probe is non-imaging and depth reading will be off due to the probe's diameter, which is normal.)
  • High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
  • Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
  • Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
  • GI-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
  • No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
  • No extra batteries required as the GI-1 utilizes the detectors power source.
    Complete installation & operation instructions included.

FULL 12 MONTH WARRANTY!!

Sunray GI-1 Garret Inline Probe
Plus Shipping
Qty: Price: $179.95

View Shopping Cart | Empty Shopping Cart

SUN RAY STEALTH X-12 (for the Minelab Explorer S, XS, II & Quattro)

By popular demand we have produced this ultra light weight coil for those wanting a large coil with great depth but without the extra weight!

  • *Full 12.5" Double-D coil!
  • *Great ground coverage!
  • *Great Depth!
  • *Ultra light weight - only 20 1/2 oz - less than stock 10.5" coil!
  • *Waterproof/submersible!
  • *Includes open fitted coil cover.
  • * FULL 12 MONTH WARRANTY!!
SUN RAY STEALTH X-12 (for the Minelab Explorer S, XS, II & Quattro)
Our Price: $219.95

Plus Shipping
Qty: Price: $219.95

View Shopping Cart | Empty Shopping Cart

SUN RAY STEALTH X-8 (for the Minelab Explorer S, XS, II & Quattro)
  • * Full 8" Double-D coil!
  • * Waterproof/submersible!
  • * Good ground coverage!
  • * Great Depth!
  • * Ultra stable operation!
  • * Ultra light weight - less than 16 oz!
  • * Superior target separation over stock 10.5" coil!
  • * Coil cover included!
  • * FULL 12 MONTH WARRANTY!
SUN RAY STEALTH X-8 (for the Minelab Explorer S, XS, II & Quattro)
Our Price: $199.95

Plus Shipping
Qty: Price: $199.95

View Shopping Cart | Empty Shopping Cart
SUN RAY STEALTH X-5 (for the Minelab Explorer S, XS, II & Quattro)
  • * Maximum target separation in extreme high trash conditions!
  • * 5.5" Double-D coil!
  • * Excellent depth capabilities!
  • * Waterproof/submersible!
  • * Coil cover included!
  • * Weighs only 10 oz!
  • * FULL 12 MONTH WARRANTY!

Field test reports indicate X-5's ability to find desirable targets missed by other coils in high ferrous as well as non-ferrous trash conditions!

SUN RAY STEALTH X-5 (for the Minelab Explorer S, XS, II & Quattro)
Our Price: $189.95

Plus Shipping
Qty: Price: $189.95

View Shopping Cart | Empty Shopping Cart
Sun Ray Explorer S, XS, II & Quattro 10.5" Coil Support Bracket Kit

*Eliminates coil "creeping" when digging targets.
*
Ten possible coil positions.
*
Allows coil to be tipped up when hunting hills, banks, walls, etc.
*
Made of sturdy ABS plastic.
*
Reduces stress on coil bolt.

(NOTE: Please state whether kit is for the Explorer S/XS or the new Explorer II/Quattro when ordering.)

Sun Ray Explorer S, XS, II & Quattro 10.5" Coil Support Bracket Kit
Our Price: $9.95

Plus Shipping
Qty: Price: $9.95

View Shopping Cart | Empty Shopping Cart
SUN RAY X-1 TARGET PROBE For the Minelab Explorer S, XS, II & Quattro
  • Accurate "Bullseye" pinpointing on coin size targets up to 3" deep in discriminate mode - 2 1/2" in pinpoint mode!
  • Light weight, waterproof/submersible 1" X 9" probe. Comes with 30" straight cable with strain relief, and mounts nicely along the Explorer's battery compartment.
  • Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy switching from coil to probe. Makes coil changes super fast as coil cable will no longer be inserted into upper shaft!
  • X-1 gives operator ALL of the same functions as stock coil including accurate visual and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc.
  • Accurate approximate depth indications from tip of probe to target can be achieved through visual observation of the Explorer's depth gauge (although the scale will be different). Scale is explained in X-1 instructions. Accuracy on coin size targets only.
  • No external buzzers or lights are needed as all targets are heard clearly through your detector headphones!
  • FULL 12 MONTH WARRANTY!!

WE NOW HAVE A GOOD SUPPLY OF EXPLORER II & QUATTRO UPPER SHAFTS IN STOCK!

(WARNING: The Explorer XS & S upper shaft is not recommended for use with the new Explorer II/Quattro control housing and may damage the locking system.) NOTE: We except no responsibility for any damage caused to the Explorer II/Quattro control housing if you choose to use the XS & S upper shaft for your X-1 Probe installation on the new Explorer II/Quattro.)

NOTE: Your Explorer or Quattro upper shaft must be sent to Sun Ray for the X-1 Probe installation or a new one may be purchased from your dealer or direct from Sun Ray. Contact your local Sun Ray Dealer or Sun Ray Detector Electronics direct for full details and price. When ordering X-1 be sure to state which arm you swing with (right or left) for proper probe switch installation.

SUN RAY X-1 TARGET PROBE For the Minelab Explorer S, XS, II & Quattro
Comes with Attached Lower Rod

Plus Shipping
Qty: Price: $214.95

View Shopping Cart | Empty Shopping Cart
SUN RAY EXPLORER RAIN JACKET

Protect your Explorer XS, S & II with our new Sun Ray Explorer Rain Jacket. Keeps rain, dust, mud, etc. from damaging the LCD display and internal parts of the control housing! Eliminates LCD display scratches! Made from UV stabilized urethane coated nylon. Full view plastic face allows access to all controls and allows easy viewing of LCD display. Fits snugly over control housing and is secured by two sturdy velcroed web straps. The Sun Ray Explorer Rain Jacket is available in five attractive colors - Fall Camo, Dark Brown, Navy Blue, Silver Gray and now also in Black. Order yours today!!!

SUN RAY EXPLORER RAIN JACKET
Our Price: $12.95

Plus Shipping
Qty: Price: $12.95

View Shopping Cart | Empty Shopping Cart
Mastering the MINELAB EXPLORER XS & S

by Andy Sabisch

* Covers all aspects of how to get the most out of the new Explorer series in the field under a wide range of conditions.
* Each chapter provides detailed explanations of the features, how to best adjust them and how to find more in less time - even in hunted-out areas!
* This book is designed for Explorer owners as well as those that are still "kicking the tires" and want to learn more about what the Explorer offers.

Mastering the MINELAB EXPLORER XS & S
Our Price: $14.95

Plus Shipping
Qty: Price: $14.95

View Shopping Cart | Empty Shopping Cart
Mastering the MINELAB QUATTRO

by Andy Sabisch

  • Full-Band Spectrum technology explained - the secret behind the Quattro MP.
  • Features and specs of the Quattro.
  • Air testing & test gardens.
  • The Quattro's controls explained.
  • Tips & techniques!
  • Chapters on coin, relic, beach and competition hunting with the Quattro!
  • If you didn't know about the Quattro before you will after reading this book!
Mastering the MINELAB QUATTRO
Our Price: $14.95

Plus Shipping
Qty: Price: $14.95

View Shopping Cart | Empty Shopping Cart
SUN RAY INTRUDER S-12 For the Minelab Sovereign (all versions)

By popular demand we have produced this ultra light weight coil for those wanting a large coil with great depth but without the extra weight!

  • Full 12.5" Double-D coil!
  • Great ground coverage!
  • Great Depth!
  • Ultra light weight - only 23 1/2 oz - less than stock 10" coil!
  • Waterproof/submersible!
  • Includes open fitted coil cover.
  • FULL 12 MONTH WARRANTY!!
SUN RAY INTRUDER S-12 For the Minelab Sovereign (all versions)
Our Price: $219.95

Plus Shipping
Qty: Price: $219.95

View Shopping Cart | Empty Shopping Cart
SUN RAY INTRUDER S-8 For the Minelab Sovereign (all versions)
  • Waterproof/submersible!
  • Good ground coverage!
  • Great Depth!
  • Full 8" Double-D coil!
  • Ultra stable operation!
  • Ultra light weight - only 18 1/2 to 19 oz - lighter than BBS 800 and older Coinsearch coil!
  • Superior target separation over BBS 1000 coil
  • Coil cover included!
  • FULL 12 MONTH WARRANTY!
SUN RAY INTRUDER S-8 For the Minelab Sovereign (all versions)
Our Price: $199.95

Plus Shipping
Qty: Price: $199.95

View Shopping Cart | Empty Shopping Cart
SUN RAY INTRUDER S-5 For the Minelab Sovereign (all versions)
  • Maximum target separation in extreme high trash conditions!
  • 5.5" Double-D coil!
  • Excellent depth capabilities!
  • Waterproof/submersible!
  • Coil cover included!
  • Weighs only 12 oz!
  • FULL 12 MONTH WARRANTY!

Field test reports indicate S-5's ability to find desirable targets missed by other coils in high ferrous as well as non-ferrous trash conditions!

SUN RAY INTRUDER S-5 For the Minelab Sovereign (all versions)
Our Price: $189.95

Plus Shipping
Qty: Price: $189.95

View Shopping Cart | Empty Shopping Cart
SUN RAY S-1 SUPER TARGET PROBE For the Minelab Sovereign (All versions XS-2a Pro and earlier)
  • Accurate "Bullseye" pinpointing on coin size targets up to 3" deep in all metal mode! 1 1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin size targets)
  • Accurate visual ID when used with Sun Ray or Minelab digital meter!
  • Uses the Sovereign's BBS circuitry to cancel ground effects and reject most hot rocks!
  • No buzzers or lights necessary. All target responses come directly through your headphones! Makes hand held probes obsolete!
  • No extra batteries required!
  • S-1 probe is 1" X 9" long, comes with (A) partially coiled probe cable or (B) straight cable (less tangles), for easy pinpointing and is submersible.
  • Probe is detachable from S-1 switch box for direct insertion to Sovereign control housing for stand alone detecting/pinpointing!
  • Includes 2 S-1 Probe Clips for attaching S-1 probe along side arm rest or upper shaft when not in use!
  • Ultra Light Weight! The "New" S-1 has a smaller, more compact switch box and weighs 2 1/2 oz less than original S-1. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight including 2 probe clips=13 oz!
  • S-1 switch box comes with a short standard length cable and connects directly into your Minelab or Sun Ray meter.
  • Optional 12" switch box extension cable available if mounting your Sovereign control housing under the arm rest w/o a meter. Optional 50" switch box extension cable available if hip/chest mounting Sovereign control housing w/o a meter.
  • FULL 12 MONTH WARRANTY!!
SUN RAY S-1 SUPER TARGET PROBE
For the Minelab Sovereign (All versions XS-2a Pro and earlier)

Our Price: $179.95

Plus Shipping
Qty: Price: $179.95

View Shopping Cart | Empty Shopping Cart

S-1 SUPER TARGET PROBE 12" Extension Cable
Our Price: $16.95

Plus Shipping
Qty: Price: $16.95

View Shopping Cart | Empty Shopping Cart

S-1 SUPER TARGET PROBE 50" Extension Cable
Our Price: $19.95

Plus Shipping
Qty: Price: $19.95

View Shopping Cart | Empty Shopping Cart

SUN RAY S-1 SUPER TARGET PROBE For the new Minelab Sovereign Elite

  • Accurate "Bullseye" pinpointing on coin size targets up to 3" deep in all metal mode! 1 1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin size targets)
  • Accurate visual ID when used with Sun Ray or Minelab digital meter!
  • Uses the Elite's BBS circuitry to cancel ground effects and reject most hot rocks!
  • No buzzers or lights necessary. All target responses come directly through your headphones! Makes hand held probes obsolete!
  • No extra batteries required!
  • S-1 probe is 1" X 9" long, comes with (A) partially coiled probe cable or (B) straight cable (less tangles), for easy pinpointing and is submersible.
  • S-1 switch box slides onto the meter mounting bracket and the meter slides onto the top of the S-1 switch box allowing you to see the Minelab meter display easier and allows switching from coil to probe and back with the flip of your thumb!
  • Probe is detachable from S-1 switch box for direct insertion to Elite control housing for stand alone detecting/pinpointing!
  • Includes S-1 Probe Clip Attachment for attaching S-1 probe along side arm rest when not in use!
  • Ultra Light Weight! The "New" S-1 has a smaller, more compact switch box and weighs 2 1/2 oz less than original S-1. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight including 2 probe clips=13 oz!
  • S-1 switch box comes with a short standard length cable and connects directly into your Minelab or Sun Ray meter.
  • Optional 12" switch box extension cable available if mounting your Elite control housing under the arm rest w/o a meter. Optional 50" switch box extension cable available if hip/chest mounting Elite control housing w/o a meter.
  • FULL 12 MONTH WARRANTY!!
SUN RAY S-1 SUPER TARGET PROBE
For the new Minelab Sovereign Elite

Plus Shipping
Qty: Price: $179.95

View Shopping Cart | Empty Shopping Cart

S-1 SUPER TARGET PROBE 12" Extension Cable
Our Price: $16.95

Plus Shipping
Qty: Price: $16.95

View Shopping Cart | Empty Shopping Cart

S-1 SUPER TARGET PROBE 50" Extension Cable
Our Price: $19.95

Plus Shipping
Qty: Price: $19.95

View Shopping Cart | Empty Shopping Cart

 

SUN RAY 12v NIMH RECHARGEABLE PAKS (Drop-In & Plug-In type for Minelab Metal Detectors)
  • Our paks are 10 cell 1650 mah nickel-metal-hydride. NIMH cells are memory free and ours will give you 31+ hrs. of charge life compared to 12-15 hrs. with the factory 700 mah NICAD paks!
  • Our paks use a DC jack connector for easy plug insertion! (No more struggling to plug or unplug your battery from the charger or control housing)

SUN RAY NIMH 12v PAK (Plug-Type) - For original Sovereign, Sov. XS, XT17000, Gold Striker, FT16000, etc.

 

Only $69.95 + S&H (Shipping Wt 11 oz)

SUN RAY 12v NIMH RECHARGEABLE PAKS
(Drop-In & Plug-In type for Minelab Metal Detectors)

Our Price: $59.95

Plus Shipping
Qty: Price: $59.95

View Shopping Cart | Empty Shopping Cart

SUN RAY NIMH 12v SUPER DROP-IN PAK - Fits snugly in battery compartment - no slop! Thinner than factory pak for easier battery door opening and closing! For Sovereign XS-2, XS-2 Pro, XS-2A Pro, XT18000, Musketeer XS Pro, XS, Colt, etc.
SUN RAY NIMH 12v SUPER DROP-IN PAK
Our Price: $69.95

Plus Shipping
Qty: Price: $69.95

View Shopping Cart | Empty Shopping Cart

Optional Adaptors
White's 9.6v Recharge Pak Adaptor (XLT/DFX/MXT)
Our Price: $3.00

Plus Shipping
Qty: Price: $3.00

View Shopping Cart | Empty Shopping Cart

Minelab Explorer NIMH Pak Battery Station
Our Price: $16.95

Plus Shipping
Qty: Price: $16.95

View Shopping Cart | Empty Shopping Cart

Minelab Sovereign Elite NIMH Pak Battery Station
Our Price: $19.95

Plus Shipping
Qty: Price: $19.95

View Shopping Cart | Empty Shopping Cart
SUN RAY INVADER™ DX-1 TARGET PROBE (Compatible with White's DFX & MXT)

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for White's metal detectors! The new Sun Ray Invader DX-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of DFX/MXT users. We have received many requests for in-line target probes by White's and other detector brand users for several years due to the popularity of our quality in-line probes for the Minelab Explorer and Sovereign/Elite. Now White's owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the DX-1:

  • Fully compatible with both DFX and MXT models! The DX-1 is precision built to ensure peak performance on either model!
  • Accurate "bullseye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!
  • Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft (which has been very popular among Explorer users). DX-1 probe and cable weigh approx. 6 oz. DX-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing).
  • While the DX-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.)
  • DX-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
  • High quality custom made, durable probe and connector cable used with identical specifications as White's cable for precision performance! (NOTE: Probe now available in either partially coiled or straight cable (less tangles).
  • Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
  • Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
  • DX-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
  • No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
  • No extra batteries required as the DX-1 utilizes the detectors power source.
  • FULL 12 MONTH WARRANTY!!
SUN RAY INVADER™ DX-1 TARGET PROBE
(Compatible with White's DFX & MXT)

Plus Shipping
Qty: Price: $179.95

View Shopping Cart | Empty Shopping Cart

DX-1 TARGET PROBE Optional Box Mount Probe Clip Attachment
Our Price: $19.95

Plus Shipping
Qty: Price: $19.95

View Shopping Cart | Empty Shopping Cart
SUN RAY INVADER™ XL-1 TARGET PROBE (Compatible with White's XLT and other 6.592 khz models)

Sun Ray Detector Electronics is proud to announce our new Invader™ series of aftermarket accessories for White's metal detectors! The new Sun Ray Invader XL-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of XLT and other users with models operating with 6.592 khz. We have received many requests for in-line target probes by White's and other detector brand users for several years due to the popularity of our quality in-line probes for the Minelab Explorer and Sovereign/Elite. Now White's owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the XL-1:

  • Fully compatible with both XLT and models using 6.592 khz! The XL-1 is precision built to ensure peak performance on those models!
  • Accurate "bullseye" pinpointing on coin size targets up to 3"+ deep depending on detector used, settings, ground and moisture conditions!
  • Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft (which has been very popular among Explorer users). XL-1 probe and cable weigh approx. 6 oz. XL-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5 oz. - approx. 11 oz total! (Optional box mount probe clip attachment available for those wishing to mount probe along side of detector control housing - presently available for the slim-line control boxes like the XLT, IDX Pro, etc).
  • While the XL-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as White's.)
  • XL-1 incorporates all of the same functions as the stock coil including accurate visual and audible target ID (if the detector model provides those functions) along with identical pinpoint functions! (Depth reading will be off due to the probe's diameter which is normal.)
  • High quality custom made, durable probe and connector cable used with identical specifications as White's cable for precision performance! (NOTE: Probe now available in either partially coiled or straight cable (less tangles).
  • Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
    Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
  • XL-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
    No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
  • No extra batteries required as the XL-1 utilizes the detectors power source.
  • FULL 12 MONTH WARRANTY!!
SUN RAY INVADER™ XL-1 TARGET PROBE
(Compatible with White's XLT and other 6.592 khz models)

Plus Shipping
Qty: Price: $179.95

View Shopping Cart | Empty Shopping Cart

XL-1 TARGET PROBE Optional Box Mount Probe Clip Attachment
Our Price: $19.95

Plus Shipping
Qty: Price: $19.95

View Shopping Cart | Empty Shopping Cart

SUN RAY PRO GOLD HEADPHONES

Sun Ray Detector Electronics is proud to introduce our new Sun Ray Pro Headphones. We decided to offer a high quality set of professional headphones without the highest price! The Sun Ray Pros were manufactured according to our exact specifications as follows:

* High output 150 ohm (nominal impedance) speaker elements which are certified as hearing aid compatible and are sensitive enough to pick up even the faintest of signals. Aluminum case construction with polymer cones for moisture and sweat protection.
* Dual 32 position "segmented or detent" volume controls.
* Limiter circuit on/off switch. (Reduces loud blasts from surface targets, while allowing the faintest of signal responses to be clearly heard.)
* Mode selector switch makes the new Sun Ray Pros compatible with most metal detectors.
* Comfortable, lightweight dual swivel point ear cups.
* Adjustable ribbed headband.
* One of the industries most durable coiled cables with internal strain relief and 1/4" right angle, molded plug.

The new Sun Ray Pros will deliver a crisp audio response with volume to spare!

Limited Lifetime Warranty!

(Compare the quality & performance of the new Sun Ray Pros to headphones costing $120.00 - $140.00!)

SUN RAY PRO GOLD HEADPHONES
Our Price: $105.95

Plus Shipping
Qty: Price: $105.95

View Shopping Cart | Empty Shopping Cart
SUN RAY DELUXE TREASURE POUCH
  • Hand-made from top quality leather - double stitched and riveted for extra strength and durability!
  • Treasure pouch has two velcroed pouches for treasure, extra batteries, etc., large pouch for trash, sheath for digger or buck knife and two PVC holders for coin popper or screwdriver and probe.
  • Accepts 2 1/4" belt (Not included).
  • Available in (L) left or (R) right hand side. Specify which side when ordering.
  • (Note: Color or shade of Pouch may be different from photo depending on leather supply.)
SUN RAY DELUXE TREASURE POUCH
Our Price: $36.95

Plus Shipping
Qty: Price: $36.95

View Shopping Cart | Empty Shopping Cart
WATERPROOF 5-PIN IN-LINE CONNECTORS
(Excellent for modifying your Minelab Excalibur or other 4-5 pin water detectors for coil interchange!!)

* Makes changing coils on your water detector a snap!
* Easy installation!
* Some knowledge of soldering and wiring required.
* Recommended for shallow water hunting. Not recommended for deep diving situations.

Contact us for more information or to place an order.

We do not offer detailed installation instructions and results may vary. We do not guarantee results. We do guarantee the connectors to be free of defects. You should contact your detector/coil manufacturer for wire pin ID, etc. before attempting installation.

NOTE: NOT RECOMMENDED FOR DETECTORS WHICH ARE UNDER WARRANTY!! YOUR WARRANTY COULD BE VOIDED!!

SUN RAY WATERPROOF 5-PIN IN-LINE CONNECTORS
Our Price: $25.00

Plus Shipping
Qty: Price: $25.00

View Shopping Cart | Empty Shopping Cart

© 2009 TCMETALDETECTORS.COM
Web Page Design by Papertiq